1. Create new temporary instrument

In Air Manager, navigate to the create/edit tab.

1. Click New+ to create a new instument. Details don't matter as we delete this again later.
2. Select the new Instrument in the list.
3. Click "Folder" in the menu and find the folder OPEN_DIRECTORY.
   This is where insturments are installed.
   Pin it to the favorites in Explorer for easy access.
4. You can delete the test instrument.

2. Install the GNS430 Instrument

1. Download this repository
2. move the gns430-hardware folder into `OPEN_DIRECTORY``
3. The Instrument is now installed.

3. Use the Instrument in a Panel

1. In AirManager, go to the home tab.
2. Select the panel in the list on the left.
3. Click Instument+in the Ribbon Menu.
4. Find GNS430 Hardware and add it.
5. Open the instrument list by click the triangle next to the panel in the panel list.
6. Select Generic - GNS430 Hardware
7. Scroll down to user properties and select the pins to which the cables were soldered.
8. Have fun.

Hints

Arduino Channels

Arduinos have assigned channels. This channel is selected when flashing the arduino (Flash Menu). In Step #3, Channel 0 Corresponds to Channel A, 1 to B, 2 to C, and so forth.

The Arduino must be flashed and I suggest channel B.

Available Pins

Do not use Pins D0 and D1, as they are used for serial communication between airmanager and the arduino. You can use Pins D2 and upwards.

Default assignment

The Buttons and Encoders have a default assignment, which is loaded when adding the instrument. Changes to the selection are stored until the instrument is removed from the panel. It will reset to the default when the instrument is added again.