arduino = "ARDUINO_MEGA2560_B_"

function getHardwareId(pin)
    arduinoChannel = "B" -- <== Change Arduino Channel here (assigned in air manager setup -> Home -> Flash)
    return "ARDUINO_MEGA2560_" .. arduinoChannel .. "_" .. pin
end

function event(id)
    print(id)
    fs2020_event(id)
end

buttons = {
    -- Left side Buttons
    COMSWAP = {
        name = "COM FlipFlop",
        pin = "D2",
        event = "H:AS430_COMSWAP_Push"
    },
    NAVSWAP = {
        name = "NAV FlipFlop",
        pin = "D3",
        event = "H:AS430_NAVSWAP_Push"
    },
    -- Lower Buttons
    CDI = {
        name = "CDI",
        pin = "D4",
        event = "TOGGLE_GPS_DRIVES_NAV1"
    },
    OBS = {
        name = "OBS",
        pin = "D5",
        event = "H:AS430_OBS_Push"
    },
    MSG = {
        name = "MSG",
        pin = "D6",
        event = "H:AS430_MSG_Push"
    },
    FPL = {
        name = "FPL",
        pin = "D7",
        event = "H:AS430_FPL_Push"
    },
    PROC = {
        name = "PROC",
        pin = "D8",
        event = "H:AS430_PROC_Push"
    },
    -- Right Side Buttons
    DCT = {
        name = "DCT",
        pin = "D9",
        event = "H:AS430_DirectTo_Push"
    },
    MENU = {
        name = "MENU",
        pin = "D10",
        event = "H:AS430_MENU_Push"
    },
    CLR = {
        name = "CLR",
        pin = "D11",
        event = "H:AS430_CLR_Push",
        event2 = "H:AS430_CLR_Push_Long"
    },
    ENT = {
        name = "ENT",
        pin = "D12",
        event = "H:AS430_ENT_Push"
    },
    -- Zoom Buttons
    ZOOM = {
        name = "Range +",
        pin = "D13",
        event = "H:AS430_RNG_Zoom"
    },
    DEZOOM = {
        name = "Range -",
        pin = "D14",
        event = "H:AS430_RNG_Dezoom"
    },
    -- Knob Push Buttons
    CVPUSH = {
        name = "C/V Push",
        pin = "D15",
        event = "H:AS430_LeftSmallKnob_Push"
    },
    CRSRPUSH = {
        name = "CRSR Push",
        pin = "D16",
        event = "H:AS430_RightSmallKnob_Push"
    }
}

knobs = {
    CVBig = {
        name = "C/V Large Knob",
        pinA = "D17",
        pinB = "D18",
        event = "H:AS430_LeftLargeKnob"
    },
    CVSmall = {
        name = "C/V Small Knob",
        pinA = "D19",
        pinB = "D20",
        event = "H:AS430_LeftSmallKnob"
    },
    CRSRBig = {
        name = "CRSR Large Knob",
        pinA = "D21",
        pinB = "D22",
        event = "H:AS430_RightLargeKnob"
    },
    CRSRSmall = {
        name = "CRSR Small Knob",
        pinA = "D23",
        pinB = "D24",
        event = "H:AS430_RightSmallKnob"
    }
}

-- run the setup
setupButtons()
setupEncoders()